Filler Materials
AMR Gases stocks a full line of welding wires, TIG rod and stick electrodes – from all the Lincoln Electric, Hobart, National Standard, ESAB, AVESTA and BONARC.
No matter what you are welding; Steel, Aluminum, Stainless steel, or Bronze AMR Gases has the filler material for your welding job!
STEEL ELECTRODES
The old tried and true covered stick electrode, for pipe welding, laying down heavy weld material or just for general fabrication! Choose what suits you best!
Type:
Choose Your Size:
Choose Your Application:
Choose Your Brand:
6010
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
Good for root passes on pipe to dig through dirt, rust and paint. DC only. All positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
6011
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
Similar to 6010, but can be run on AC and DC. All positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
6013
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
General purpose rod to use on thin gauge materials, clean surfaces, easy arc. All positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
7014
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
General purpose, low alloy steels, easy run, easy restart. All positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
7018
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
General purpose, used to weld thick steels, plate and structural work and high impact values even in cold weather. All positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
7024
1.6, 2.5, 3.2, 4.0, 5.0, 6.0mm
General purpose, high speed, used to weld thick steels, plate and structural work and high impact. Flat and horizontal positions.
Lincoln, ESAB, Bonarc, Bohler, Hobart
SPECIALTY ELECTRODES
Type:
Choose Your Size:
Choose Your Application:
JS165
2.5, 3.2mm
Welding dissimilar steels, high alloy.
JS210
1.6, 2.0, 2.5, 3.2, 4.0mm
Easy to use mild steel electrode for thin gauge material.
JS215
2.5, 3.2, 4.0mm
Low alloy all position electrode; structural steel.
JS220
2.5, 3.2mm
Used to weld low alloy high strength steels, such as T1, HY90, HY1, SSS100 and Jalloy 90 and 100, commonly used to fabricate tanks.
JS230
2.5, 3.2, 4.0mm
Used to weld high strength low alloy steels and abrasion resisting plate.
JS245X
2.5, 3.2, 4.0mm
Used to join and resurface dissimilar steels, and as a build up.
JH60
3.2, 4.0, 5.0mm
Used as a hard facing electrode for resistance to abrasion and impact, up to 60 rockwell.
JH63
3.2, 4.0, 5.0mm
Used as a hard facing electrode for resistance to abrasion and impact, up to 63 rockwell. Better resistance to corrosion.
JC32
2.5, 3.2mm
Used to weld all grades of grey cast iron, as well as blackheart iron.
JC34
2.5, 3.2, 4.0mm
Used to weld nodular graphite cast irons, and to weld graphite cast irons to grey cast iron.
JG200S
3.2, 4.0mm
Used to gouge, groove all ferrous and non ferrous metals.
JA40
2.5, 3.2mm
Aluminum stick electrode.
STEEL TIG ROD
Type:
Choose Your Size:
Choose Your Application:
Choose Your Brand:
E70S-2
.035, .045, 1.6, 2.5, 3.2, 4.0mm
Mild steel tig rod for carbon steel applications primarily used on tube or pipe welding.
Harris
STEEL MIG WIRE
S6 is probably the most popular welding wire available, and AMR Gases has the brand you use, choose from Copper Coated or Copper Free!
Type:
Choose Your Size:
Choose Your Brand:
S-6 Copper Coated
.023, .030, .035, .045, .052
Lincoln, ESAB, Exocor, Bonarc, Murex, National Standard
S-6 Copper Free
.023, .030, .035, .045, .052
National Standard, ESAB
STEEL FLUX CORE
If you are laying down a lot of weld material then Flux Core wire is YOUR wire. AMR Gases has the brands you need, place an order today!
Type:
Choose Your Size:
Choose Your Brand:
Flux Core Wire
.030, .035, .045, .052, 1/16, 3/32
Lincoln, ESAB, Hobart, Exocor, National Standard
STEEL SELF SHIELDING
If you are welding outside in the field, then a self shielding gasless wire is for you!
Type:
Choose Your Size:
Choose Your Brand:
Self Shielding Wire
.015 .030 .035 .052, 1/16, 3/32
Lincoln, ESAB, Hobart
STEEL METAL CORE
With Metal Core welding you can lay down more weld material, faster and with less spatter than traditional S6 mig wire.
Type:
Choose Your Size:
Choose Your Brand:
Metal Core Wire
.030, .035, .045, .052
Lincoln, ESAB, Exocor, Hobart, National Standard
ALUMINUM TIG and MIG WIRE
Choose your Aluminum MIG or TIG, 4043 or 5356. AMR Gases has it all!
Type:
Choose Your Size:
Choose Your Brand:
4043
.035, .045, 1.6, 2.5, 3.2
Lincoln, ESAB
5356
.035, .045, 1.6, 2.5, 3.2
Lincoln, ESAB
BRONZE
Type:
Choose Your Size:
Choose Your Application:
Choose Your Brand:
Bare Bronze
1.6, 2.5, 3.2mm
Used to weld light gauge steel, metal furniture. Good penetration with low risk of blow through.
Aufhauser, Harris
Flux Coated Bronze
1.6, 2.5, 3.2mm
Same as Bare Bronze, but easier to weld with for inexperienced welders.
Aufhauser, Harris
Silicon Bronze
1.6, 2.5, 3.2mm
Similar to Bare Bronze, but runs smoother than Bare Bronze. Light gauge steels, HVAC.
Aufhauser, Harris
STAINLESS MIG, TIG and STICK
If you weld Stainless MIG, TIG or STICK, you need AMR Gases – all the brands in one shop.
Type:
Choose Your Size:
Choose Your Application:
Choose Your Brand:
308
.030, .035, .045,
1.6, 2.5, 3.2, 4.0mm
308L (including ER308LSi) is predominately used on austenitic stainless steels such as types 301, 302, 304, 305 and cast alloys CF-8 and CF-3. For high temperature applications such as in the electrical power industry, the high carbon 308H electrode provides better creep resistance than does 308L.
Lincoln, ESAB, Avesta, Harris
309
.030, .035, .045,
1.6, 2.5, 3.2, 4.0mm
Use 309L (including ER309LSi) when joining mild steel or low alloy steel to stainless steels, for joining dissimilar stainless steels such as 409 to itself or to 304L stainless, as well as for joining 309 base metal.
Lincoln, ESAB, Avesta, Harris
316
.030, .035, .045,
1.6, 2.5, 3.2, 4.0mm
316L (including ER316LSi) filler metal should be used with 316L and 316 base metals. CF-8M and CF-3M are the cast equivalents of 316 and 316L, respectively.
Lincoln, ESAB, Avesta, Harris